Cross Beam
$TBD
Standard Overhaul Exchange
$TBD
Cross Beam
Description
Cross Beam
P/N 350A38-1040-00
STANDARD OVERHAUL EXCHANGE: $6,000.00
STANDARD OVERHAUL INCLUDES: All required inspections per OEM for “3000hr inspection”, All parts required to re-assemble after inspection disassembly, and parts normally found worn which include: 579069G LAMINATE / 579065H LAMINATE / DHS439-111.22 NUT / DHS439-111.27 NUT / ECS2033-32 ID TAG / 23116AG120LE WASHER / ASN52320BH120N NUT / 23118CA140 WASHER / 350A38-1032-20 BOLT LONGITUDINAL / 350A38-1031-20 BOLT, LATERAL / 350A38-1024-20 WASHER
Included in operation: a suspension cross-member, an attachment to the structure, an attachment to the MGB, laminated stop supports, washers, nuts of supports, lateral and longitudinal laminated stops and, laminated suspension blocks bolts, nuts of bolts.
The 2 longitudinal laminated stop assemblies absorb the shearing moments and forces on the longitudinal axis.
The 2 lateral laminated stop assemblies absort the shearing moments and forces on the longitudinal axis.
The rotor counter torque is absorbed in compression with the 4 laminated stop assemblies the 2 longitudinal laminated stop assemblies and the 2 longitudinal laminated stop assemblies.
The suspension cross-member connects the 2 laminated stop groups the 2 longitudinal laminated stop assemblies and the 2 longitudinal laminated stop assemblies.
The suspension cross-member is called a bi-directional suspension cross-member because it works on the longitudinal axis and the lateral axis.
When the aircraft is in autorotation the direction of the loads is inversed: each laminated stop is backed up by a different laminated stop which works in compression only when the torque is inversed.
If a laminated stop should fail, all of the suspension is secured by the laminated stop supports.